KPT
KPT is suitable for continuous liquids level measurement. Typical application are waste water and deep wells. KPT is a pressure transmitter which can be used for the liquids, gases, and vapors measurement. The small size pressure transducer offers maximum operational reliability. KPT is an inexpensive solution for many different applications in all industrial process control.
· 2-wired 4÷20mA transmitter
· Pressure Classification: Absolute, Negative, Gauge
· Accuracy: on request 0.25%
· Heavy applications suitable
· Any position installable
· Compact transmitter
KPT is suitable for continuous liquids level measurement. Typical application are waste water and deep wells. KPT is a pressure transmitter which can be used for the liquids, gases, and vapors measurement. The small size pressure transducer offers maximum operational reliability. KPT is an inexpensive solution for many different applications in all industrial process control.
· 2-wired 4÷20mA transmitter
· Pressure Classification: Absolute, Negative, Gauge
· Accuracy: on request 0.25%
· Heavy applications suitable
· Any position installable
· Compact transmitter
|
Power supply |
12÷42Vdc (2-wires) |
|
Measuring Range |
Gauge Pressure Max. 0÷400bar (0÷40Mpa); Min. 0÷0.25bar (0÷25kPa)
Absolute Pressure Max. 0÷25bar (0÷2,5MPa); Min. 0÷1bar (0÷100kPa)
Negative Pressure Max. -1÷+39bar (-0.1÷3,9MPa); Min. -0.1÷0bar (-10÷0kPa)
|
| Output |
4÷20mA |
|
Overload Capacity |
1.5 / F.S |
|
Accuracy |
±0.25% |
|
Stability |
> ±0.1%FS 12 months |
|
Working Temperature |
-30° ÷ +120°C |
|
Mechanical protection |
IP65 |
|
Temperature compensation |
-10° ÷ +80°C |
|
Max. adjustment scale |
“Zero” ±5%F.S.; End scale ±20%F.S |
|
VL601 |
Display/keypad module (VL601SGM code) for rapid and/or advanced programming of all the METER transmitters |
 |
|
MUX |
Multiplexer adatti alla gestione e controllo da 1 a 8 sonde termometriche digitali mono o multipunto, max. 12, tipo TT Connessione elettrica al multiplexer delle sonde termometriche digitali mono o multipunto tipo TT sempre tramite cavo schermato a 3 conduttori ,configurazione multiplexer tramite 3 tasti a bordo. Visualizzazione su display a bordo multiplexer della configurazione e delle singole temperature rilevate. Connessione elettrica tra multiplexer e unità di visualizzazione e controllo tramite cavo bipolare schermato, tipo AWG22, per comunicazione dati digitali in rete seriale RS485 Fino a max. 63 multiplexer collegabili in rete seriale Multiplexer perfettamente compatibile con i sistemi di rilevamento, controllo e visualizzazione temperature SGM LEKTRA già in opera tipo: MUXA/B/C/D; AGRITHERM10; AGRITHERM20; AGRITHERM40 |
 |
|
MOUNTING SYSTEM FOR ULTRASONICS |
Wide range of accessories for units VLW90M, METER, FLOWMETER ,SGM-101F mounting and their matched sensors. The mounting system is modular and is made entirely of 304. |
 |
